Hangtai 150 Metal pipe Thread Sealant – The Optimal and Superior Solution for Metal Pipe Threading, Outperforming AB Epoxy
Are you looking for a fast, secure, and cost-effective solution for metal pipe threading? Hangtai 150 thread sealant is the top choice for you! With its outstanding effectiveness in sealing and locking metal threaded connections, Hangtai 150 is trusted by many engineers, contractors, and construction companies to completely replace traditional methods and even AB epoxy (two-component epoxy adhesive).

Why Choose Hangtai 150 Thread Sealant for Metal Pipe Threading?
- Fast Application, Saving Time and Materials
Hangtai 150 thread sealant has an initial curing time of only about 20 minutes and reaches maximum strength after 24 hours at room temperature. The application process is simple: just clean the threads, apply the sealant to the male thread (or both male and female threads for pipes larger than DN25), tighten, and let the sealant cure on its own without complex mixing like with AB epoxy. This significantly reduces application time and material waste compared to AB epoxy, which requires precise mixing of two components and has a very limited pot life (about 1 hour after mixing).
- Superior Durability and Pressure Resistance
Hangtai 150 sealant creates an absolutely tight connection, withstanding high pressure from 20 to 50 bar, and effectively resisting vibration and corrosion. In contrast, AB epoxy typically only withstands low pressures below 10 bar and is not specialized for threaded connections, often leading to leaks in large systems. Hangtai 150 thread sealant also withstands temperatures from -55°C to 135°C, making it suitable for many harsh working environments.
- Saving on Maintenance and Repair Costs
Unlike AB epoxy, which becomes very hard and difficult to remove, Hangtai 150 thread sealant allows for easy disassembly with specialized tools when maintenance or repair is needed, helping to reduce future maintenance costs and time. AB epoxy often requires the destruction of the joint for repair, which is costly and time-consuming.
- Safe, Environmentally and User-Friendly
Hangtai 150 thread sealant does not contain harmful substances, does not corrode metal threads, and does not create residue in the pipeline, ensuring safety for the installer and the surrounding environment. This is a significant advantage over many other sealants on the market.

Quick Comparison: Hangtai 150 Metal pipe Thread Sealant vs. AB Epoxy for Metal Pipe Threading
| Criteria | Hangtai 150 Thread Sealant | AB Epoxy (Two-component epoxy) |
| Application Time | Fast, no mixing required, cures in 20 minutes | Complex mixing, longer curing time |
| Material Waste | Low, uses just enough sealant | High, requires precise mixing, short pot life, easy to waste sealant |
| Cost | Reasonable, saves overall costs | Higher overall cost due to material waste, longer application time, higher leakage rate, and complex repair costs often requiring destruction of the threaded joint |
| Durability & Pressure Resistance | High, withstands 20-50 bar pressure, effective anti-vibration | Low, withstands pressures below 10 bar, not specialized |
| Disassembly Capability | Easy to disassemble for maintenance | Almost permanent, difficult to disassemble |
| Applications | Fire protection systems (PCCC), compressed air, gasoline, hot/cold water, chemicals | Typically used for temporary, non-specialized repairs |
Typical Applications of Hangtai 150 Thread Sealant
- Sealing metal pipe threads in fire protection systems (PCCC).
- Compressed air, hot/cold water, gasoline, and chemical pipeline systems.
- Installing threaded mechanical equipment that requires a secure, tight joint.
- Replacing traditional methods like PTFE tape and hemp in pipe threading applications.

Technical Specifications:
| Specification | Details |
| Product Code | Hangtai 150 |
| Adhesive Classification | One-component thermosetting adhesive |
| Initial Curing Time | 20 minutes |
| Breakaway Torque (10*20 galvanized screw) | 8-20N.M |
| Full Curing Time (Room temperature) | 24 hours |
| Operating Temperature | -55~135℃ |
| Active Content | ≥ 99% |
| Shelf Life | 24 months |
| Execution Standard | JB/T7311-2016 |
| Application Fields | Sealing metal pipe threads, flange sealing |
| Viscosity (mPa.s) | 45000-75000 |
| Specific Gravity (g/cm³) | 1.05-1.1 |
| Suitable Pipe Diameter | DN15 – DN150 |
Instructions for using Hangtai 150 fire protection pipe thread sealant:
Step 1: Preparation
- Cleaning: Ensure that the threads of the fire protection pipe and threaded fittings are completely cleaned. Remove dirt, grease, rust, or any other residue. You can use a wire brush, sandpaper, or cleaning solvent to clean the threads.
- Inspection: Check the threads of the pipe and fittings to ensure they are not damaged, dented, or have any other issues. If the threads are damaged, you should replace them with new fittings.
Step 2: Applying the adhesive
- Application: Apply a sufficient amount of adhesive to both the internal and external threads of the pipe and fittings. Ensure the adhesive is evenly distributed across the entire threaded surface.
Step 3: Connecting the pipe
- Threading: Thread the pipe and fittings together. Tighten with just enough force to ensure a tight seal, but do not overtighten to avoid damaging the threads.
- Curing: Allow the adhesive to fully cure according to the manufacturer’s instructions. The initial curing time is 20 minutes (at 20°C) and fully cures after 24 hours (pressure testing is then possible). For stainless steel, the curing time is doubled.

Where to Buy Genuine Hangtai 150 Thread Sealant?
tintamtri.vn is the official importer and distributor of high-quality Hangtai 150 thread sealant. Order Hangtai 150 thread sealant on our website today to receive a genuine product at the best price, along with free technical consultation and fast delivery support. Ensure your metal pipe thread systems are always secure, leak-proof, and durable over time.
In conclusion, Hangtai 150 thread sealant is the optimal solution to replace AB epoxy and traditional methods for metal pipe threading, helping you save time and money, improve joint quality, and make maintenance and repairs easier. Don’t hesitate, experience the difference with Hangtai 150 now!
Hangtai 150 Metal pipe Thread Sealant - Công ty TNHH MTV Tín Tâm Trí

Hangtai 150 Metal pipe Thread Sealant – The Optimal and Superior Solution for Metal Pipe Threading, Outperforming AB Epoxy
Product SKU: HTSL 150
Product Brand: Hangtai
Product Currency: VND
Product Price: 1500
Price Valid Until: 30-09-2030
Product In-Stock: InStock
5


Đánh giá
Chưa có đánh giá nào.